Zennio
Zennio ALLinBOX 46 — Multifunction Actuator with Power Supply & KNX-IP Interface
Model: ZPR46
Multifunction Actuator
ALLinBOX
The original-generation compact all-in-one KNX device combining power supply, KNX-IP interface, 4 outputs and 6 inputs with onboard logic functions.
KNX Medium
TP (Twisted Pair)
Inputs
6
Outputs
4
Key Features
- 4 outputs; 6 inputs; integrated KNX power supply; integrated KNX-IP interface; onboard logic functions
Typical Applications
- Small apartments or single-zone installations
Advantages
- Same compact consolidation benefit as the v2, at what is typically a lower price point for the earlier generation.
Limitations
- Earlier generation than ZPR46V2 — check current feature/firmware differences before choosing over the v2 for new projects.
Technical Specifications
General Specifications
| Manufacturer | Zennio |
|---|---|
| Series | ALLinBOX |
| Model / Part Number | ZPR46 |
| SKU | ZPR46 |
| Product Status | Active (predecessor generation to ZPR46V2) |
KNX Specifications
| KNX Medium | TP (Twisted Pair) |
|---|---|
| KNX TP | Yes |
| KNX IP | Yes |
| KNX Tunnelling | Yes |
| Bus Voltage | 21-30V DC (typical 29V SELV) |
Physical Specifications
| Mounting | DIN rail |
|---|---|
| IP Rating | IP20 |
| Operating Temperature | 0 to +45 °C (varies slightly by model; see datasheet) |
Electrical Specifications
| Number of Inputs | 6 |
|---|---|
| Number of Outputs | 4 |
Presence & Motion
| Detection Technology | N/A (not a motion/presence sensor) |
|---|---|
| Detection Range | N/A |
| Detection Angle | N/A |
| Recommended Mounting Height | N/A |
| Lux Range | N/A |
DALI Specifications
| DALI Standard | N/A (not a DALI device) |
|---|---|
| DALI Channels | N/A |
| DALI Devices | N/A |
| DALI Groups | N/A |
Dimming Specifications
| Dimming Technology | N/A |
|---|---|
| Minimum Load | N/A |
| Dimming Range | N/A |
Thermostat / HVAC Specifications
| Humidity Measurement | No |
|---|---|
| HVAC Modes | N/A |
Manufacturer Documentation
KNXHub Verdict
Worth checking against the v2 model on price and current feature set before specifying for a new project.
KNXHub Product Information
Product specifications should be checked against the latest manufacturer documentation before publication.
Product specifications should be checked against the latest manufacturer documentation before publication.
Last verified: 2026-09-03
