Product image not available
ABB
ABB KNX IP Router Secure
Model: IPR/S 3.5.1
ABB IPR/S 3.5.1 is a KNX IP Router Secure that links a KNX TP line or area to an Ethernet-based KNX IP backbone. It supports KNXnet/IP Secure for both routing and tunnelling and can operate as a fast line or area coupler. The router supports the complete filter table for main groups 0–31 and allows KNX devices to be programmed through the LAN using ETS. Five secure tunnelling servers are available for additional clients. The IP address may be configured statically or obtained from a DHCP server. Power is supplied either from 12–30 V DC or PoE compliant with IEEE 802.3af Class 1. Standard KNX IP multicast communication can be disabled to allow up to ten compatible IPR/S 3.5.1 devices to communicate using unicast.
The device is a two-module modular installation unit for 35 mm DIN-rail mounting. Published dimensions are approximately 90 × 36 × 64.5 mm and the enclosure is rated IP20. KNX bus current consumption is below 10 mA; the router also requires its auxiliary DC or PoE supply. It is intended for backbone connectivity, line/area coupling and secure remote ETS access, rather than simple tunnelling-only access. Network design should account for multicast or unicast mode, IP addressing, backbone topology and the security requirements of the KNX project. The appropriate ABB ETS application and device commissioning key are required for secure commissioning.
Technical Specifications
| Manufacturer | ABB |
|---|---|
| Model / Part Number | IPR/S 3.5.1 |
| Device Type | KNX IP Router / Line and Area Coupler |
| KNX Medium | TP / IP |
| KNX Secure | KNX IP Secure (Routing and Tunnelling) |
| KNX IP Support | Yes |
| KNX Bus Current Draw (mA) | <10 mA |
| Dimensions | 90 × 36 × 64.5 mm; 2 modules |
| Mounting | 35 mm DIN rail (MDRC) |
| IP Rating | IP20 |
| Channels | 5 secure tunnelling servers |
| Outputs | 1 × Ethernet RJ45; KNX TP bus connection |
| Compatible Load Type | N/A – communication interface |
| Special Functions | KNX IP Secure routing and tunnelling; line/area coupler; full filter table for main groups 0–31; 12–30 V DC or PoE (IEEE 802.3af Class 1); DHCP/static IP; multicast or unicast operation; up to 10 routers in unicast mode |
| DALI Support | No |
