KNX Status Feedback Explained: Commands vs Status in ETS
A KNX command and a KNX status are not necessarily the same thing. A wall switch can send an ON […]
Programming
KNX Logic & Automation Explained: Triggers, Conditions, Actions, Timers & Interlocks
KNX automation becomes significantly more powerful when a system can make decisions instead of simply passing commands from one device
KNX Communication Flags Explained: C, R, W, T, U & I
KNX Communication Flags determine how a Group Object communicates with the KNX bus. They are configured at the Group Object
KNX DPT Explained: Data Point Types Every KNX Integrator Should
KNX Data Point Types, commonly called DPTs, define how information is represented and interpreted when it is exchanged between KNX
KNX Scenes Explained: Scene Control, Scene Numbers & ETS Design
A KNX scene allows multiple building functions to be changed together using a single command. Instead of controlling each light,
KNX Group Address Design: Structure, Naming & Best Practices
A well-designed KNX project is not only about selecting the right devices and programming their parameters. The Group Address structure
How to Create Reusable ETS Templates
Introduction Reusable ETS templates are one of the most powerful — and most misunderstood — tools in professional KNX projects.
KNX Commissioning Checklist (Before Handover)
Introduction A KNX system does not fail at handover because of missing features.It fails because small commissioning steps were skipped
Migrating Poorly Designed ETS Projects – A Practical Recovery Guide
Introduction Sooner or later, every experienced KNX integrator inherits a project that was poorly designed. Common signs: Migrating such an
Naming Conventions That Scale in ETS
Introduction In small KNX projects, poor naming is an inconvenience.In large KNX projects, poor naming becomes a serious operational risk.
KNX RF Commissioning in ETS – Step-by-Step Guide
Introduction Commissioning is where a KNX RF project either becomes stable and predictable or turns into a long-term service headache.
ETS Project Structuring for Large KNX Projects
Introduction In small KNX projects, ETS structure often doesn’t matter much.In large projects, ETS structure becomes the project’s backbone. Poor
ETS Download Errors – Causes and Fixes
Introduction ETS download errors are among the most frustrating issues in KNX projects.They usually appear under pressure — during commissioning,
KNX Programming – Troubleshooting
Introduction KNX (Konnex) is a prominent standard for building automation, enabling the integration and control of various devices within residential,
